WER GmbH

Miller® gloves are designed to endure daily abuse prevalent within welding environments. Carefully selected materials and craftsmanship result in a glove that welders will want to wear, reducing the risk of hand lacerations and boosting productivity.

Miller® TIG Pro welding gloves fully made from goat grain leather, with the cuff in cow split. Unlined. The glove is sewn with strong and heat resistant
Kevlar® thread with double stitching at exposed areas. Extra reinforcements in both the thumb and the full index finger for increased durability.
Elastic band at the wrist for a better and safer fit. Goatskin leather is both thin, supple and durable while the upper hand in cow split provide extra
heat resistance. 

Good dexterity with the thin, supple and durable goatskin leather. Perfect for thin metal welding at low to medium amps.

Materials
Goat grain leather
Cow split leather
Kevlar® thread

Size 8-12

Standards
EN 420
EN 388:2016
EN 407
EN 12477:2001

Kevlar® threads provide:
 - High heat resistance (does not melt)
 - 2.5 times stronger than nylon or polyester thread
 - Little to no stretch for a tight seam

Spec Sheet English

Miller® gloves are designed to endure daily abuse prevalent within welding environments. Carefully selected materials and craftsmanship result in a glove that welders will want to wear, reducing the risk of hand lacerations and boosting productivity.

Miller® TIG Welding gloves made from goat grain leather, with the upper hand and cuff in cow split. Unlined. The glove is sewn with strong and
heat resistant Kevlar® thread with double stitching at exposed areas. Extra reinforcements in both the thumb and the full index finger for longer life. Elastic seam at the wrist for a better and safer fit. Goatskin leather is both thin, supple and durable while the upper hand in cow split provide extra heat resistance.

Good dexterity from the goatskin pal and fingers combined with better radiated heat protection in the cow split back. Perfect for welding at medium to higher amps.

Materials
Goat grain leather
Cow split leather
Kevlar® thread

Size 8-12

Standards
EN 420
EN 388:2016
EN 407
EN 12477:2001

Kevlar® threads provide:
- High heat resistance (does not melt)
- 2.5 times stronger than nylon or polyester thread
- Little to no stretch for a tight seam

Spec Sheet English

Miller® gloves are designed to endure daily abuse prevalent within welding environments. Carefully selected materials and craftsmanship result in a glove that welders will want to wear, reducing the risk of hand lacerations and boosting productivity.

Miller® Universal welding gloves fully made in specially treated leather making the gloves both water and oil repellent. Goat suede leather in the palm with
full index finger reinforcement. The upper hand in goat grain leather. 15 cm long cuff in heat resistant cow split leather for added protection. Durable double stitching with heat resistant Kevlar® thread in all areas exposed to wear and tear. An elastic seam in the wrist provides a safer fit. Fully lined with a 180 grams brushed Kevlar® lining. The brushed lining increases comfort but also has insulating properties. This means that the glove can be used outdoor in colder weather without using an extra glove as a liner. 

The material used in the Miller® Universal welding gloves has been carefully selected to ensure a long life. The gloves offer the protection needed during heavy duty MIG/MAG welding combined with the dexterity required for TIG welding. 

Materials
Goat suede leather
Goat grain leather
Cow split leather
Kevlar® lining
Kevlar® thread

Size 8-12 

Standards
EN 420
EN 388:2016
EN 407
EN 12477:2001 

Kevlar® threads provide:
- High heat resistance (does not melt)
- 2.5 times stronger than nylon or polyester thread
- Little to no stretch for a tight seam

Spec Sheet English

Extra-durable polo shirt with high-quality 3-hole button strip with extra-durably sewn-on, break-proof buttons, tone in tone with the lasered HAKRO lettering. With spare button and neckband. Rental label for easy identification in commercial laundries and hanging straps in the seam. Made of soft, particularly easy-to-clean and functional piqué from the HAKRO performance material mix MIKRALINAR® ECO with recycled polyester certified according to GRS standard. Woven HAKRO neck label made of high-quality warp satin with soft, ultrasound-cut band edges for maximum wearing comfort and woven HAKRO flag label on the left side seam.

Extra-durable, long-sleeved polo shirt with high-quality 3-hole button strip with extra-durably sewed on, break-resistant buttons, tone on tone with the lasered HAKRO lettering. With spare button and neck tape. The rib knit cuffs on the sleeves are shape-retentive thanks to the LYCRA® content. Rental label for easy identification in commercial laundry and hangers in the seam. Made of heavy, easy-to-clean and functional piqué made of the HAKRO performance material mix MIKRALINAR®. Woven HAKRO neck label made of high-quality warp satin with soft, ultrasonic cut band edges for maximum wearing comfort and woven HAKRO flag label on the left side seam.

Particularly hard-wearing, long-sleeved polo shirt with high-quality 3-hole button placket with extra-durable sewn-on, break-proof buttons, tone-in-tone with Besonders strapazierfähiges T-Shirt mit rundem Halsausschnitt, geripptem Halsbündchen und Nackenband. Leasingkoller zur einfachen Kennzeichnung in der gewerblichen Wäscherei und Aufhängebänder im Saum. Hergestellt aus weichem, besonders pflegeleichtem und funktionellem, mittelschweren Single-Jersey aus MIKRALINAR® ECO, dem HAKRO Performance-Materialmix aus hochwertiger Baumwolle und nach GRS-Standard zertifiziertem, recyceltem Polyester. Gewebtes HAKRO Necklabel aus hochwertigem Kettsatin mit weichen, ultraschallgeschnittenen Bandkanten für höchsten Tragekomfort und gewebtes HAKRO Flaglabel an der linken Seitennaht.